Handling equipment ...................................................................................................
I PWV 601 I GW 608 I HW 602 I RFW 605 I KWI 606 I PRK 610 I SG/SVG/SGD I
I DT 635 I MK 635 I MKR 635 I RB I HRS 652 I VHB 660 I VPA/VPAH I VPPH 660 I 
 ....................................................................................................................................

> ROTOX - Section trolley - vertical PWV 601

Transporting, buffering and interim storing of bars.

Features:
- Solid steel construction
- Rotating castors
- Shelf dividers covered with PVC

Option:
- 2 stopping rolls

               

.............................................................................................................................. 

 

> ROTOX - Glass trolley GW 608

Transport and interim storage of panes and plate material.

Features:
- Solid steel construction
- Rotatable castors
- Covered with abrasion-proof rubber

Option:
- 2 stop rolls

.............................................................................................................................. 

 

> ROTOX - Seal trolley HW 602

For holding reels for seal strips.

Features:
- Solid steel construction
- Adjustable to different reel sizes
- Rotatable castors
- HW 302 for 2 reels
- HW 304 for 4 reels
- Tool tray (on HW 602-2)

Option:
- 2 stop rolls

.............................................................................................................................. 

 

> ROTOX - Frame trolley RFW 605

Transport and interim storage of frames and sashes.

Features:
- Solid steel construction
- Rotatable castors
- With 10 compartments
- Compartment divider covered with plastic
- Base plate of wood with additional compartment dividers

Option:
- 2 stop rolls

.............................................................................................................................. 

 

> ROTOX - Finished element trolley KWI 606

Transport and interim storage for frame and sash elements.

Features:
- Solid steel construction
- Rotatable castors
- Covered with abrasion-proof rubber
- Trolley can be telescoped

Option:
- 2 stop rolls

.............................................................................................................................. 
 

> ROTOX - Carousel for sash frames PRK 610

For buffering sash frames, 360° pivotable.

Features:
- Solid steel construction
- 360° pivotable
- With 40 compartments
- Compartment divider covered with plastic
- Base plate of wood with additional compartment dividers

.............................................................................................................................. 
 

> ROTOX - Sliding work table
   SG, SVG und SGD

Designed for horizontal working on frame and sash elements.

Features:
- Solid steel construction
- Table support with guide rails
- Different table widths and lengths available
- Attachments are easy to mount
- Passage elements

Options:
- Table support with brush rails
- Tools carrier
- Pressure gauge with filter
- Maintenance unit
- Distribution panel
- Pneumatic distributor

.............................................................................................................................. 
 

> ROTOX - Rotary Table DT 635

Versatile use in the sash and frame production.

Features:
- Solid steel construction
- Telescopic and swivel-mounted support arms
- Locking in 45°-steps
- Support arms telescopic to 500 mm
- Covered with slip-resistant rubber

Options:
- Tool tray
- Guide rolls

.............................................................................................................................. 
 

> ROTOX - Tilting assembly table MK 635

Precise and steady tilting and working of window elements.

Features:
- Applicable in horizontal or vertical production lines or as
  single workplace
- Roller support Ø 50 x 100 mm, collapsible
- With 2 tilting cylinders
- Table support covered with guide rails
- Working height horizontal 900 mm
- Control by foot valves

Options:
- Upper support extendable
- 500 mm extendable support on each side
- Lifting device with 400 mm lift
- Flat clamping cylinder with hand valve
- Set of rollers for the sash stop
- Tool tray
- Undercarriage with parking brake
- Pressure gauge with filter
- Maintenance unit
- Distribution board 4-fold
- Pressure distributor 3-fold

.............................................................................................................................. 
 

> ROTOX - Shutter box assembly tilting  
   table MKR 635

for assembly of shutter boxes

Features:
- Shutter box support adjustable with hand wheel
- Tilting table available in two options:
   working depth manual or motor movable
- Profile support with sliding guide rail
- Below profile support with roller conveyor
  ø 50 x 200 mm folding pneumatically
- Pneumatic tilting device
- Weatherboard and sill recess

Options:
- Undercarriage with locking brake
- Pneumatic service unit
- Distribution panel fourfold
- Pneumatic distributor threefold

.............................................................................................................................. 
 

> ROTOX - Roller conveyor RB

Linear vertical transport of frame elements.

Features:
- Solid steel construction
- Steel rolls Ø 50 x 200 mm to support the frames
- 5 rails of small rollers for the frame support
- Recesses for the bottom rail for weatherboarding
  and window sills

Options:
- Attachment individually expandable
- Steel rolls Ø 50 x 500 mm for the support of wide frames
- 5 sliding or roller rails for the frame positioning
  instead of the small roller rails
- Twice or fivefold divided rollers
- Limit stop
- Protective rollers for the beginning or the end
  of the roller conveyor

.............................................................................................................................. 
 

> ROTOX - Lifting roller stay HRS 652

For the transfer of heavy windows to the window transport trolley.

Features:
- Solid construction
- Control by foot valve
- Width of roller conveyor 100 mm
- Adapted to finished element trolley: KWK 606

.............................................................................................................................. 
 

> ROTOX - Glazing and assembly lifting
   track VHB 660

For the glazing of uPVC window elements.

Features:
- Solid construction
- Ergonomic working by pneumatic height
  adjustment with 500 mm height of lift
- Sliding rails
- Width (mm): 3000/4000
- Height (mm): 2300
- Roller support (mm): Ø 50 x 200
- Partition (mm): 200

Options:
- Under-carriage with fixing brake
- Shelf of deposit
- Upper support plate extendable by 500 mm
- Flat clamping cylinder to fix the window elements

.............................................................................................................................. 
 

> ROTOX - Glazing presses
   VPA and VPAH

For the glazing of uPVC window elements with adjustable clamping pressure, one manually movable and both manually folding clamping bar.

Features:
- Solid construction
- High accuracy of angles
- Right clamping bar manually movable, both clamping
  bars manually folding
- Ergonomic working due to pneumatic height
  adjustment with 500 mm lift (VPAH) by foot valve
- Operating elements are clearly arranged on
  the clamping bar
- Sliding guide rail

Options:
- Undercarriage with locking brake
- Distance between the rollers of the horizontal roller
  conveyor 100 mm
- Rear profile positioning facilities with brush strips or  
  uPVC roller guide rail

.............................................................................................................................. 
 

> ROTOX - Glazing press VPPH

For the glazing of uPVC window elements with pneumatic-synchronous, move and clamping of both clamping bars.

Features:
- Solid construction
- High accuracy of angles
- Pneumatic-synchronous move and clamping of both
  clamping bars; pressing bars can be folded to the back
- Ergonomic working due to pneumatic height  adjustment
  with 500 mm lift
- Suited for production lines, as the pressing bars fold
  automatically to the back

Options:
- Sash stops
- Undercarriage with locking brake
- Distance between the rollers of the horizontal roller
  conveyor 100 mm
- Rear profile positioning facilities with brush  strips or
  plastic roller strips Ø 48 mm

..............................................................................................................................