|
Milling machines
........................................................................................................
I SAF
166 I SAF
165 I
EAF
1666 I
FBO
224 I
FBO
326 I FWS
381 I
FWS
281 I
FWS
388 I
I
KF
341-342 I
KF
343-344 I
KFB
353-354 I
KF
347-348 I
KF
349 I
SEF 220 I
KA
160 I
....................................................................................................................................
 |
>
ROTOX
End Milling Machine SAF 166
End milling of
transoms and mullions on uPVC profile bars.
Features:
- Mitre guide with 1°-scale and locking in 15°-steps, pivoting
range from 90° to 22,5°
- With extraction unit
- Pneumatic profile clamping
- Profile stop 0,1 mm adjustable
Options:
- Machine stand
- Motor version with quick changing system for the
milling cutter
- Turret stop for 8 different milling depths
 |
..............................................................................................................................
 |
>
ROTOX
End Milling Machine SAF 165
End milling of transoms
and mullions of uPVC and aluminium profile bars.
Features:
- Guide shaft of 40 mm in diameter and a wide distance
between the shafts ensure a smooth operation
- Flexible equipment owing to modular design
- Mitre guide with 1°- scale locking in 15°-steps
pivoting range 45°-90°-20°
- Stop for milling depth adjustable with vernier, 0,1 mm
- Spray unit (aluminium)
Options:
- Motor designed for quick release cutter holder or height
adjustment by hand wheel including mechanical
digital display
- Depth stop with digital length measuring device
- Turret stop for 8 different milling depth
- Hydropneumatic or frequency controlled feed
- Digital mitre square display
- Drill unit for e.g. transom cross-holes
- uPVC: automatic elevation adjustment of the milling
motors for 2 to 4 milling heights
|
..............................................................................................................................
..............................................................................................................................
 |
>
ROTOX Milling and Drilling machine
FBO 224
For automatic milling of lock cases and drilling of handle holes.
Features:
- Automatic process
- Short cycle times
- Easy handling
- Adjustable milling
length
- Suited for all
profile systems
- Single operation of
the milling and drilling units
by selection switch
Option:
- With centring device
for centric handle positions
and/or length stop for constant handle measures
|
..............................................................................................................................
 |
>
ROTOX Milling and Drilling machine
FBO 326
Variable milling of lock cases and
drilling of handle holes for all applications.
Features:
- Automatic milling of conventional gear slots
(length variably adjustable)
- Electronic PLC control for reliable
and precisely
adjustable processes
Options:
- Different handle back sets adjustable
by hand wheel
including mechanical digital display
- Height of lock case for different
overlap heights
adjustable by hand wheel
- Length positioning of the bars by
centring device
and/or adjustable folding stop for constant handle
position
- Automatic milling of rectangular
recesses for
overhanging handles
|
..............................................................................................................................
 |
>
ROTOX Drain Slot
Milling Machine
FWS 381
For the simultaneous milling of
two staggered slots.
Features:
-The travel of the lower milling unit guarantees the
staggered slots of the inner bead drainage
- Adjustment of the units to the milling positions
by hand wheels and adjusting aids
- Equipment with 3 milling units
- Simultaneous milling of 2 staggered, lengthwise
adjustable drain slots in 2 (3) planes
- Pressure gauge with filter
Optional extra:
- High frequency equipment
|
..............................................................................................................................
 |
>
ROTOX Drain
Slot Milling Machine FWS 281
The new
generation of ROTOX automatic drain slot milling machines.
Features:
- The inner bead being the bearing
surface only little
adjustment of the milling units is necessary
- Equipment with 4 automatically working milling units
- Simultaneous milling of 2 staggered, lengthwise
adjustable drain slots at 2 (3) levels
- Selection of the milling units for the right or left end of
the profile bar by two-hand control
- Selection of the unit for visible or invisible drainage
by hand switch
- Adjustment of the units to the milling positions by
hand wheels and adjusting aids
- Two-hand control
Options:
- High frequency equipment
- Equipment for sill frame profiles
|
..............................................................................................................................
 |
>
ROTOX Drain Slot Milling
Machine
FWS 388
Efficient routing of drain slots on uPVC profile bars in one clamping
process.
Features:
- Modular design
It can be equipped with up to 12 milling or drilling
units depending on the customer's requirements.
- It can be equipped with 1 fixed and up to 3 mobile
motor carriages for simultaneous milling at the
beginning and end of the profile bar and at the
transom positions
- Short cycle times
- Easy positioning of the motor carriage by stops
and/or scale
Option:
- Additional sliding workpiece carriage for
drain slots
on the left and right side of the transom
|
..............................................................................................................................
 |
>
ROTOX
Copy Router KF 341 / KF 342
For the milling of aluminium and uPVC profiles.
Features:
- User-friendly handling by two hand levers
- Wide milling range of 300 x 110 mm
- 2 copying bolts reducing the set-up time
- Pneumatic clamping system
Option:
- support tupes of 2250 mm with scale and folding
length stops
|
..............................................................................................................................
 |
>
ROTOX
Copy Router KF 343 / KF 344
Processing of 3 sides in one clamping process.
Features:
- Processing on 3 sides of sash and frame profile
bars in one clamping process for e.g. profile
cylinders, handle holes, lock cases as well as lock
cases for 3-fold and 5-fold locking
- Equipped with 4 copying bolts for a flexible and
easy handling of the template system
- Easy loading of the machine with profile bars
without disturbing milling units
- Manual turning device for the profile bar for a
processing on 3 sides
- Optimal processing results due to the possibility of
using short tools
- Simple adjustment of the profile support table by
means of linear guides. Thus it is not necessary to
release the profile clamping.
|
..............................................................................................................................
 |
>
ROTOX Lock and
hinge
copy Router KFB 353 /
354
Processing of 3 sides in one clamping process
Characteristic features:
- Processing on 3 sides of sash and frame profile bars in
one clamping process for e. g. profile cylinders, handle
holes, lock cases as well as lock cases for 3-fold and
5-fold locking and door hinges
- Equipped with 4 copying bolts for a flexible and
easy handling of the template system
- Easy loading of the machine with profile bars
without disturbing milling units
- Manual turning device for the profile bar for
processing on 3 sides
- Optimal processing results due to the possibility
of using short tools
- Simple adjustment of the profile support table by means
of linear guides. Thus it is not necessary to release the
profile clamping.
- Easy handling
- quick clamping
- quick release device for templates
- Universal version
- suitable for twopart or threepart door hinges
- Low expense for retooling
- only change of template and / or drilling tool for
different profile or door hinge systems
|
..............................................................................................................................
 |
>
ROTOX
Copy Router KF 347 / KF 348
3 sides can be worked in one clamping process.
Features:
- Processing on 3 sides of sash and frame profile
bars in one clamping process for e. g. profile
cylinders, handle holes, lock cases
- Equipped with 4 copying bolts for a flexible and
easy handling of the template system
- Easy loading of the machine with profile bars
without disturbing milling units
- Manual turning device for the profile bar for
processing on 3 sides
- Optimal processing results due to the possibility
of using short tools
|
..............................................................................................................................
 |
>
ROTOX
Copy Router KF 349ec
For the milling
of aluminium and uPVC.
Features:
- Inexpensive copy router designed to mill recesses
in uPVC and to drill handle holes in uPVC
steel reinforcement
- Wide milling range of 300 x 110 mm
- Pneumatic work piece clamping
Options:
- Quick mounting system for the triple drill head
- Hydro-pneumatic feed for the drilling through steel
reinforcements
|
..............................................................................................................................
 |
>
ROTOX Milling machine for mullion
windows SEF 220
Milling of corners on mullion window
profiles.
Features:
- Complete machining of corners on
mullion windows
simply by pressing a button
- Minimal cycle and tooling times
- User friendly operation
- Maintenance friendly
- Quick amortization due to low
purchase cost
- Optionally available with height adjustment for a second
milling level
- Profile support table
|
..............................................................................................................................
 |
>
ROTOX Transom
cutting, milling and
drilling machine KA 160
Fully automatic cutting of
transom profiles, contour milling of both profile bar ends and drilling
of the fixing holes for the transom connection in aluminium or uPVC
profiles.
Features:
- Fully automatic working cycle
- Precise working results
- Minimum working cycle: ca. 30 sec. (up to 60 sec.
incl. the drilling) for both transom ends
- Up to 3 sets of milling cutters for uPVC processing
- Short set up times for profile changes
- Electronic control
Optional extras:
- Pneumatic feed
- Installation of a length stop incl. electronic positioning
- Installation of a NC-controlled profile feed
|
..............................................................................................................................
|
