Hand machines ..........................................................................................................
 I HAG 128 I DI I DN I DNF I BN I BNS I GX I PLW I SA I SE I WS I Nutfix I SUP 170/200 I 7405 I
 ....................................................................................................................................

> ROTOX Hand-held knifing machine
   HAG 128

Universal knifing of bevelled inner corners and inner corner curves.

Features:
- The machine can easily be fixed manually at the corners
  of welded frames
- Easy manual movement of the knife by lever
- Usable for inner corner curves and bevels of 21° - 60°
- High machining quality due to spring mounted knifing unit
  compensation tolerances

.............................................................................................................................. 

 

> ROTOX Inner Corner Milling Machine DI

designed to mill  weld seams on inner corners.

Features:
- The machine can be positioned problem-free due to
   the angle guide. The spherical cutter removes the
   projecting welding seam.
- Pneumatic motor with HM milling cutter Ø 3 or 4 mm

.............................................................................................................................. 

 

> ROTOX Gasket Groove Milling
   Machine DN

designed to mill gasket grooves.

Features:
- This hand milling machine is very small in
  dimension so that it reaches the groove even in
  extreme cases.
- Pneumatic motor with HM milling cutter Ø 3
  or 4 mm

.............................................................................................................................. 

 

> ROTOX Gasket Groove Milling Machine
   DNF 133

designed to mill internal and external gasket grooves. 

Features:
- A milling cutter especially made for your profile
  removes the welding seam and mills the gasket groove.
- Pneumatic motor without milling cutter

.............................................................................................................................. 

 

> ROTOX Milling Machine for Fittings BN
designed to mill grooves, slots and recesses for fittings.

Features:
- Milling of e.g. lock plates, small locks for hinge grooves,
  till and turn joints, hinge plates etc. as well as drain
  slots.
- Pneumatic or electric motor, complete with 1 milling
  cutter each Ø 4 / 5 and 8 mm

.............................................................................................................................. 

 

> ROTOX Milling Machine BNS
designed to mill grooves for tilt and turn gears.

Features:
- For right and left tilt and turn joints can be processed
  without any modification. The milling machine can be
  adjusted to all tilt and turn joints and profile systems.
- Pneumatic or electric motor, complete with 1 milling
  cutter each Ø 10 / 12 / 14 / 16 or 18 mm

.............................................................................................................................. 

 

> ROTOX Eccentric Grinding Machine GX
designed to grind visible surfaces precisely.

Features:
- Pneumatic or electric motor, complete with 10 abrasive
  disks Ø 110 mm

.............................................................................................................................. 
 

> ROTOX Polishing Machine PLW
designed to polish visible surfaces.

Features:
- Polishes ground corners in structure and gloss, similar to
  unprocessed profile surfaces.
- Pneumatic or electric motor, complete with protective
  cover and polishing roller

.............................................................................................................................. 
 

> ROTOX Weld Seam Milling Machine SA
designed to chamfer the external weld seam.

Features:
- Usable only for corners with welding seam restriction
- Pneumatic or electric motor complete with 1 milling
  cutter Ø 11,5 mm

.............................................................................................................................. 
 

> ROTOX Weld Seam Milling Machine SE
Cleaning of outer corners of welded uPVC windows

Features:
- An exact flush finishing of the welding seam is possible
  due to a guide bead with its width being adapted to the
  diameter and its height to the length of the milling
  cutter.
- Electric motor 230 V
- Pneumatic motor 5-7 bar  with 1 milling cutter Ø 5 mm

.............................................................................................................................. 
 

> ROTOX Slot milling machine WS
Milling of drain slots and cleaning of gasket grooves

Features:
- For the milling of bevelled drain slots in the rebate of
  approx. 45° and removing of the welding seam in the
  gasket groove at inner and outer corners.
- Electric motor 230 V
- Pneumatic motor 5-7 bar 
  with 1 milling cutter Ø 4 and 5 mm each

.............................................................................................................................. 
 

> Manual knifing device Nutfix

For the knifing of weld seams on PVC window frames.

Features:
- Usable for 90° corners and angles between 30° and 180°
- For transom and circle connections
- For refinishing grooves
- For concealing profile offset in the weld seam

Optional extras:
- Standard grooving knives 2,5 mm, gerade
- Special grooving knives 2,5 mm for a small profile offset
- Special knives for flush finishing
- Additional sliding carriage
- End stop for the knifing of transoms

..............................................................................................................................   
 

> ROTOX Weld seam cutters SUP 170/200

For the knifing of weld seams on both sides of corners and transoms with pneumatic feed

Characteristic features:
- Grooving knives oscillating in one plane
- Smallest frame size 100 x 540 mm (SUP 170)
- With pneumatic feed
- Including 2 grooving knives
- With quick change over from transoms to corners
- For acute and obtuse angles of 30° - 180°

.............................................................................................................................. 
 

> Universal Grooving Equipment Type 7405


Characteristic features:
- Window bevels between 20° and 180° can be
  grooved easily and efficiently
- The machine centres of the welding bead thus
  positioning itself automatically
- One side processing
- As the machine is put on externally no transom
  working is possible

..............................................................................................................................