glasleisten

Glazing Bead Saw + Length stops .............................................................................
I GLZ 419 I GLS 405 I GLS 217 I GLA 400 I GLA 403 I GLA 404 I GLA 408 I
I GZS 399 I LA 393 I LA 396 I LA 396-AS I
....................................................................................................................................

> ROTOX Glazing Bead Saw GLZ 419

Cutting or uPVC glazing beads without measuring device.

Features:
- Integrated frame clamps to position and fix the machine
directly onto the corner of the sash
- No measuring of lengths necessary as the bead's length
can be measured directly at the sash
- Saw tilting to 45° left/right
- Carbide saw blade

Operational sequence:
- Begin to cut the glazing bead
- Push it through up to the opposite measure edge
- Tilt the saw unit on the carriage
- Finish sawing off

..............................................................................................................................

> ROTOX ROTOX Glazing Bead Saw
GLS 405

Precise and low-cost cutting of glazing beads for special windows.

Features:
- Exact angle scanning directly on the sash guarantees
exact mitre cuts without reworking
- Precise length setting by means of mechanical measuring
stop without additional appliances directly on the welded
sash
- Execute cuts of angles ranging from 30° and 160° and
straight legs of segmental arches
- With carbide saw blade

..............................................................................................................................

> ROTOX Glazing Bead Saw GLS 217

for the cutting of glazing beads of uPVC.

Features:
- Easy handling by hand lever
- Pneumatic profile clamping
- Inexpensive purchase price
- Simultaneous undercutting of the glazing bead edge
- Simultaneous notching and cutting of the glazing
bead in one clamping

..............................................................................................................................

> ROTOX Glazing Bead Saw GLA 400

Glazing bead saw for simultaneous cutting of 2 uPVC glazing beads in one clamping process at 45°.

Features:
- Cutting of 2 glazing beads at the same time
- Variable pneumatic saw blade feed
- Saw blades are arranged at the top, thus oddments
and swarfs fall freely to the floor
- Universal bead clamping on the fixing area applicable
for all glazing beads of the same basic geometry
- Pre-adjustment of the glazing bead's inclination by
hand wheel and spindle for an optimal assembly of
the glazing beads in proportion to the glass thickness

Options:
- Provision of extraction unit
- Extraction unit
- Collector for rejects
- Clamping system for glazing beads without fixing area
- Manual, digital and/or electronic length stop systems
with PC control

..............................................................................................................................

> ROTOX Glazing Bead Saw GLA 403/401

Glazing bead saw for plants of any size, designed for simultaneous cutting of 2/4 aluminium or uPVC glazing beads in one clamping process at 45°.

Features:
- Cutting of 2 glazing beads (GLA 403) or 4 glazing beads
(GLA 401) at the same time
- Variable pneumatic saw blade feed
- Saw blades are arranged at the top, thus oddments
and swarfs fall freely to the floor
- Universal bead clamping on the fixing area applicable
for all glazing beads of the same basic geometry
- Pre-adjustment of the glazing bead's inclination by
hand wheel and spindle for an optimal assembly of
the glazing beads in proportion to the glass thickness

Options:
- Provision of extraction unit
- Extraction unit
- Collector for rejects
- Clamping system for glazing beads without fixing area
- Spraying device (ALU)
- Manual, digital and/or electronic length stop systems
with PC control
- Feed and draw-off automat ZEA 397 for attachment at a
glazing bead saw GLA 403
- Motor-driven adjustment of the glazing bead tilt with
LA 396 or ZEA 397

..............................................................................................................................

> ROTOX Glazing Bead Saw GLA 404

Glazing bead saw, designed for 90° cutting of 2 aluminium or uPVC glazing beads in one clamping - suitable for plants of any size.

Features:
- Simultaneous cutting of 2 glazing beads
- Variable hydro pneumatic saw blade feed
- Saw blades are arranged at the top
- Universal bead clamping on the fixing area applicable
for all glazing beads of the same basic geometry
- Pre-adjustment of the glazing bead's inclination by
hand wheel and spindle for an optimal assembly of
the glazing beads in proportion to the glass thickness
- Spraying device (ALU)

Options:
- Manual, digital and/or electronic length stop systems
with PC control
- Clamping system for glazing beads without fixing area
- Preparation for the installation of an extraction unit
- Extraction unit

..............................................................................................................................

> ROTOX Glazing Bead Saw GLA 408

Glazing bead saw, designed for 45° or 90° cutting of
2 aluminium or uPVC glazing beads in one clamping - suitable for plants of any size.

Features:
- Simultaneous cutting of 2 glazing beads
- Variable pneumatic saw blade feed
- Saw blades are arranged at the top to effect 45° cuts.
Thus oddments and swarfs fall freely to the floor.
- 90°-cut with cutting motion from the bottom up
- Universal bead clamping on the fixing area applicable
for all glazing beads of the same basic geometry
- Pre-adjustment of the glazing bead's inclination by
hand wheel and spindle for an optimal assembly of
the glazing beads in proportion to the glass thickness

Options:
- Manual, digital and/or electronic length stop systems
with PC control
- Clamping system for glazing beads without fixing area
- Spraying device (ALU)
- Pneumatic displacement of the clamping device

..............................................................................................................................

> ROTOX Glazing Bead Feeding +
Sawing centre GZS 399

for the fully automatic cutting of glazing beads.

Characteristic features:
- Operator-friendly PC control
- Magazine feed attachment for 10 x 2 glazing beads
- Feeding and sawing of 2 glazing beads at the same time
- Universal bead clamping on the fixing area applicable
for all glazing beads of the same basic geometry
- Feeding unit with servo motor and magnetic tape
- Pneumatic off-transport to the
removal magazine with 10 shelves
- Corrections referring to profile and/or cutting lengths
- Optionally available in right or left version
- Variable pneumatic saw blade feed
- Saw blades are arranged at the top, thus oddments
and swarfs fall freely to the floor

• Motor-driven adjustment for adaptation to
different glazing bead widths

Optional extras:
• Pneumatic off-transport to the
removal magazine with 20 shelves
• Magazine feed attachment for
20 x 2 glazing beads
• Swarfs extraction
• Collector for rejects
• Measurement transmission by:
- USB interface
- Network

..............................................................................................................................

> ROTOX Manual Length Stop LA 393

Manual length setting by means of hand wheel, digital measure display.

Features:
- Available as left or right version
- Individual length adaptation by adjustable profile stop
- With continuous support W = 150 mm or roller conveyor
W = 400 mm
- Length setting by hand wheel, digital measure display
- Adjustable working height
- Accuracy +/- 0,4 mm
- Movable and tilting material stop
- Pneumatic clamping of the stop

Options:
- Roller conveyor of 150 mm width
- Accuracy +/- 0,1 mm

..............................................................................................................................

> ROTOX Electronic Length Stop LA 396

Operator-friendly Windows PC control with versatile input options.

Features:
- Operator-friendly PC control
programmed under Windows XP
- Precise measuring by magnetic tape
- Corrections referring to profile and/or cutting lengths
- Optionally available in right or left version
- Working height adjustable
Options:
- Measure transmission by:
electronic measuring stick with chip or by radio;
networks or USB-storage media;
barcode scanner;
data transmission from the sash assembly table
- Label printer
- Stopping possibility from both sides

Length Stop LA 396 - DL:
- 2 stop devices

..............................................................................................................................

> ROTOX Electronic Length Stop LA 396-AS

for reinforcement steel.

Features:
- Operator-friendly PC control
programmed under Windows XP
- Measuring by motor encoder
- Corrections referring to profile and/or cutting lengths
- Optionally available in right or left version
- Working height adjustable
Options:
- Measure transmission by:
electronic measuring stick;
networks or USB-storage media;
barcode scanner
- Label printer

..............................................................................................................................