|
Bar processing
............................................................................................................
I
SFA 255
I
SFA 256
I
SBA 485
I
ZBZ 488
I
....................................................................................................................................
 |
>
ROTOX CNC-Milling and
Drilling Centre
SFA 255
Processing on three or five sides of
door and window profiles.
Features:
- SK30 tool holding fixture
- Processing on 3 or 5 sides of door and window profiles
- Electronic 3-axes CNC control
- Visualisation of the machining contours via PC
- Fully automatic profile processing in one clamping
- End processing with saw blade
- Milling of every desired contour:
profile cylinders, handle holes, holes and fixings
for door plates, holes for striking plates, lock cases,
letter boxes, ventilation slots etc.
- Collision avoidance system for the vices
Optional extras:
- Tool changing facility for 6/10 tools
- 4th axis for the continuously variable swivelling
of the milling motor
- Version with machine stand for profile bars of
up to 8.000 mm length
- Tandem operating
- Manual control unit
- Complete cover with or without sound insulation function
- Horizontal clamping space up to 210 mm
clamping distance
- Automatic displacement of the vices
(not on tandem operating)
- Bar code scanner
- Spray unit
 |
..............................................................................................................................
 |
>
ROTOX CNC-Milling and
Drilling Centre
SFA 256
Processing on three sides of
door and window profiles.
Features:
- Processing on three sides of door and
window profiles
- Electronic 3-axes CNC control
- Visualisation of
the processing contours via PC
- Fully automatic profile processing in
one clamping
process
- Milling of every desired contour:
profile cylinders, handle holes, letter boxes,
ventilation slots, lock cases etc.
Options:
- Machine stand equipment for bar length up
to 6000 mm
|
..............................................................................................................................
|
|
>
ROTOX Profile drilling
and milling centre SBA 485
CNC-machine
in modular design
for a complete machining of uPVC windows and door profiles
in continuous process. |
|
|
Features:
- CNC machine with 3
interpolating CNC-axes
and integrated SPS control
- Approx. 60 to 140 window units per shift,
depending on the specification
- For the machining of:
- Ventilation slots and drain slots
- Dowel and transom holes
- Screw connections for steel reinforcement
- Triple hole drill and gear slots
- Lock case marking by drilling and punching
- Holes for tilt and turn gears
- All preparations can also be effected
on door sashes and frames
- Manual data input or data transfer by floppy disc,
bar code, network of AV programme
or a preceding machine
- 2 grippers for profile feeding and extraction
- PC for the machine operation and visualisation |
Options:
- Infeed and removal magazine for 10 as the case may be 20 profile bars
- Fourth interpolating CNC axe
- Extension of the machine stand for
profile bars up to a length of 4500 mm
- Reinforcement bridge
- Several processing units
- Receiver assembly station
- Barcode scanner
- Vertical notch saw unit
- Adaptation to cutting center
|
 |
..............................................................................................................................
|
|
>
Cutting and Processing Centre ZBZ 488
Consisting of
ZSA 263, SBA 485 as well as transport and reinforcement screwing
components. |
|
|
Features:
- ZBZ consisting of Cutting Centre ZSA 263
and Profile Bar Processing Centre SBA 485
- Profile feed by use of NC-Axis
- Magazine feed attachment for 10 profile bars up
to a length of 6500 mm
- Cutting angle 45°, 90° and 135°
- Cutting length: min. 300 - max. 6500 mm
- SBA 485 for processing of sash, frame and transom
profile bars with 3-axes-CNC- and SPS-control;
Bar length for processing: min. 300,
max. 3500 - 4500 mm
- Computer-control
Options:
- Magazine
feed attachment for 20 profile bars
up to a length of 6500 mm
- Cycle band across the machine direction of the
profile bars for steel insertion for 10 up to
30 profile bars
|
- Processing module in ZSA 263 for the
milling and drilling processing as well as
lock receiver marking punching machine (uPVC)
- Cutting optimisation
programme
- Saw unit with NC-axis for pivoting,
displacement 30° up to 150°
- Gasket clamping device
- Barcode scanner
- Extraction unit
- Conveyor belt and ascending conveyor for rejects
- Label printer
- Vertical notch saw unit
- Reinforcement bridge
Further features please see SBA
485 and ZSA 263
|
 |
..............................................................................................................................
|