ROTOX End Milling Machine SAF 165

End milling of transoms and mullions of PVC and aluminium profile bars.

Überlappung...

further information
Characteristic features:
  • Guide shaft of 40 mm in diameter and a wide distance between the shafts ensure a smooth operation
  • Flexible equipment owing to modular design
  • Mitre guide with 1°- scale locking in 15°-steps pivoting range 45°-90°-20°
  • Stop for milling depth adjustable with vernier, 0,1 mm
  • Spraying unit (aluminium)
Optional extras:
  • Motor designed for quick release cutter holder or height adjustment by hand wheel including mechanical digital display
  • Depth stop with digital length measuring device
  • Turret stop for 8 different milling depths
  • Hydropneum. or frequency controlled feed
  • Digital mitre square display
  • Drill unit for e. g. transom cross-holes
  • PVC: automatic elevation adjustment of the milling motor for 2 to 4 milling heights

ROTOX Drain Slot Milling Machine FWS 281

Simultaneous milling of the inlet and outlet.

Überlappung...

further information
Characteristic features:
  • The inner bead being the bearing surface only little adjustment of the milling units is necessary
  • Equipment with 4 automatically working milling units
  • Simultaneous milling of 2 staggered, lengthwise adjustable drain slots at 2 (3) levels
  • Selection of the milling units for the right or left end of the profile bar by two-hand control
  • Selection of the unit for visible or invisible drainage by hand switch
  • Adjustment of the units to the milling positions by hand wheels and adjusting aids
  • Two-hand control
Optional extras:
  • High frequency equipment
  • Equipment for sill frame profiles

ROTOX Copy Router KF 341 / KF 342

Milling on uPVC and aluminium profiles.

Überlappung...

further information
Characteristic features:
  • User-friendly handling by two hand levers
  • Wide milling range of 300 x 110 mm
  • 2 copying bolts reducing the set-up time
  • Pneumatic clamping system
Optional extras:
  • Support tupes of 2250 mm with scale and folding length stops

ROTOX Copy Router KF 343 / KF 344

Processing of 3 sides in one clamping process.

Überlappung...

further information
Characteristic features:
  • Processing on 3 sides of sash and frame profile bars in one clamping process for e.g. profile cylinders, handle holes, lock cases as well as lock cases for 3-fold and 5-fold locking
  • Equipped with 4 copying bolts for a flexible and easy handling of the template system
  • Easy loading of the machine with profile bars without disturbing milling units
  • Manual turning device for the profile bar for a processing on 3 sides
  • Optimal processing results due to the possibility of using short tools
  • Simple adjustment of the profile support table by means of linear guides. Thus it is not necessary to release the profile clamping.

ROTOX Copy Router KF 347 / KF 348

Processing of 3 sides in one clamping process

Überlappung...

further information
Characteristic features:
  • Processing on 3 sides of sash and frame profile bars in one clamping process for e. g. profile cylinders, handle holes, lock cases
  • Equipped with 4 copying bolts for a flexible and easy handling of the template system
  • Easy loading of the machine with profile bars without disturbing milling units
  • Manual turning device for the profile bar for processing on 3 sides
  • Optimal processing results due to the possibility of using short tools

ROTOX Lock and hinge copy router KFB 353 / 354

Processing of 3 sides in one clamping process.

Überlappung...

further information
Characteristic features:

  • Processing on 3 sides of sash and frame profile bars in one clamping process for e. g. profile cylinders, handle holes, lock cases as well as lock cases for 3-fold and 5-fold locking and door hinges
  • Equipped with 4 copying bolts for a flexible and easy handling of the template system
  • Easy loading of the machine with profile bars without disturbing milling units
  • Manual turning device for the profile bar for processing on 3 sides
  • Optimal processing results due to the possibility of using short tools
  • Simple adjustment of the profile support table by means of linear guides. Thus it is not necessary to release the profile clamping
  • Easy handling

    • quick clamping
    • quick release device for templates

  • Universal Version

    • suitable for twopart or threepart door hinges

  • Low expense for retooling

    • only change of template and / or drilling tool for different profile or door hinge systems