Hand machines

ROTOX Inner Corner Milling DI

Designed to mill weld seams on inner corners.

Überlappung...

further information
Characteristic features:
  • The machine can be positioned problem-free due to the angle guide. The spherical cutter removes the projecting welding seam
  • Pneumatic motor with HM milling cutter Ø 3 or 4 mm

ROTOX Gasket Groove Milling Machine DN

Designed to mill gasket grooves.

Überlappung...

further information
Characteristic features:
  • This hand milling machine is very small in dimension so that it reaches the groove even in extreme cases
  • Pneumatic motor with HM milling cutter Ø 3 or 4 mm

ROTOX Gasket Groove Milling Machine DNF 133

Designed to mill internal and external gasket grooves.

Überlappung...

further information
Characteristic features:
  • A milling cutter especially made for your profile removes the welding seam and mills the gasket groove
  • Electric motor 230 V or pneumatic motor
  • without milling cutter

ROTOX Milling Machine for Fittings BN

Designed to mill grooves, slots and recesses for fittings.

Überlappung...

further information
Characteristic features:
  • Milling of e.g. lock plates, small locks for hinge grooves, till and turn joints, hinge plates etc. as well as drain slots
  • Pneumatic or electric motor
  • complete with 1 milling cutter each Ø 4 / 5 and 8 mm

ROTOX Milling Machine BNS

Designed to mill grooves for tilt and turn gears.

Überlappung...

further information
Characteristic features:
  • For right and left tilt and turn joints can be processed without any modification. The milling machine can be adjusted to all tilt and turn joints and profile systems
  • Pneumatic or electric motor
  • Complete with 1 milling cutter each Ø 10 / 12 / 14 / 16 or 18 mm

ROTOX Eccentric Grinding Machine GX

Designed to mill grooves for tilt and turn gears.

Überlappung...

further information
Characteristic features:
  • Electric motor 230 V oder pneumatic motor 5-7 bar (Ø 75 or 110)
  • with 10 abrasive disks

ROTOX Polishing Machine PLW

Designed to polish visible surfaces

Überlappung...

further information
Characteristic features:
  • Polishes ground corners in structure and gloss, similar to unprocessed profile surfaces
  • Electric motor 230 V or pneumatic motor 5-7 bar
  • complete with protective cover and polishing roller

ROTOX Weld Seam Milling Machine SA

Designed to chamfer the external weld seam.

Überlappung...

further information
Characteristic features:
  • Usable only for corners with welding seam restriction
  • Electric motor
  • Complete with 1 milling cutter Ø 11,5 mm

ROTOX Weld Seam Milling Machine SE

Cleaning of outer corners of welded uPVC Windows.

Überlappung...

further information
Characteristic features:
  • An exact flush finishing of the welding seam is possible due to a guide bead with its width being adapted to the diameter and its height to the length of the milling cutter
  • Electric motor 230 V or pneumatic motor 5-7 bar
  • with 1 milling cutter Ø 5 mm

ROTOX Slot milling machine WS

Milling of drain slots and cleaning of gasket grooves.

Überlappung...

further information
Characteristic features:
  • For the milling of bevelled drain slots in the rebate of approx. 45° and removing of the welding seam in the gasket groove at inner and outer corners
  • Electric motor 230 V or pneumatic motor 5-7 bar
  • with 1 milling cutter Ø 4 and 5 mm each

ROTOX Hand-held knifing machine HAG 128

Universal knifing of bevelled inner corners and inner corner curves.

Überlappung...

further information
Characteristic features:
  • The machine can easily be fixed manually at the corners of welded frames
  • Easy manual movement of the knife by lever
  • Usable for inner corner curves and bevels of 21° - 60°
  • High machining quality due to spring mounted knifing unit compensation tolerances

ROTOX Weld seam cutters SUP 170/200

For the knifing of weld seams on both sides of corners and transoms with pneumatic feed.

Überlappung...

further information
Characteristic features:
  • Grooving knives oscillating in one plane
  • Smallest frame size 100 x 540 mm (SUP 170)
  • With pneumatic feed
  • Including 2 grooving knives
  • With quick change over from transoms to corners
  • For acute and obtuse angles of 30° - 180°

Universal Grooving Equipment Type 7405

Überlappung...

further information
Characteristic features:
  • Window bevels between 20° and 180° can be grooved easily and efficiently
  • The machine centres of the welding bead thus positioning itself automatically
  • One side processing
  • As the machine is put on externally no transom working is possible