Bar processing

ROTOX Profile drilling and milling centre SBA 485

CNC-machine in modular design for a complete machining of uPVC windows and door profiles in continuous process.

Überlappung...

further information
Produkt-Merkmale:

  • CNC machine with 3 interpolating CNC-axes and integrated SPS control
  • Approx. 60 to 140 window units per shift, depending on the specification
  • For the machining of:

    • Ventilation slots and drain slots
    • Dowel and transom holes
    • Screw connections for steel reinforcement
    • Triple hole drill and gear slots
    • Lock case marking by drilling and punching
    • Holes for tilt and turn gears

  • All preparations can also be effected on door sashes and frames
  • Data transfer by network of AV programme or a preceding machine through bar code
  • 2 grippers for profile feeding and extraction
  • PC for the machine operation and visualisation
Optional extras:
  • Infeed and removal magazine for 10 as the case may be 20 profile bars
  • Up to 6 CNC axes
  • Extension of the machine stand for profile bars up to a length of 6500 mm
  • Reinforcement bridge
  • Several processing units
  • Receiver assembly station
  • Barcode scanner
  • Vertical notch saw unit
  • Adaptation to cutting center

ROTOX Cutting and Processing Centre ZBZ 488

Consisting of ZSA 263, SBA 485 as well as transport and reinforcement screwing components.

Überlappung...

further information
Characteristic features:
  • ZBZ consisting of Cutting Centre ZSA 263 and Profile Bar Processing Centre SBA 485
  • Profile feed by use of NC-Axis
  • Magazine feed attachment for 10 profile bars up to a length of 6500 mm
  • Cutting angle 45°, 90° and 135°
  • Cutting length: min. 300 - max. 6500 mm
  • SBA 485 for processing of sash, frame and transom profile bars with 3-axes-CNC- and SPS-control; Bar length for processing: min. 300, max. 3500 - 4500 mm
  • Computer-control
Optional extras:
  • Magazine feed attachment for 20 profile bars up to a length of 6500 mm
  • Cycle band across the machine direction of the profile bars for steel insertion for 10 up to 30 profile bars
  • Processing module in ZSA 263 for the milling and drilling processing as well as lock receiver marking punching machine (uPVC)
  • Cutting optimisation programme
  • Saw unit with NC-axis for pivoting, displacement 30° up to 150°
  • Gasket clamping device
  • Barcode scanner
  • Extraction unit
  • Conveyor belt and ascending conveyor for rejects
  • Label printer
  • Vertical notch saw unit

 

Reinforcement bridge Further features please see SBA 485 and ZSA 263

ROTOX CNC milling and drilling centre SFA 264 M1

Cost-efficient entry into the CNC processing of door and window elements.

Überlappung...

further information
Characteristic features:
  • SK30 tool holding fixture
  • 1-side processing of door and window profiles
  • Electronic 3-axes CNC control
  • Stored standard processing for bore, circle recess, flowdrill, thread, counter bore, slot hole, square recess, free contour
  • Visualisation of the processing geometries of all 6 programmable processing sides via PC
  • Menu directed operation
  • 4 manually movable clamping positions (Standard)
Optional extras:
  • Extendable profile bar length up to 5600 mm incl. additional clamping positions
  • Safety fence (left, right and/or back side)
  • Connection to established process planning software systems
  • Bar-code scanner
  • Disk milling cutter holding device incl. disk milling cutter for notching depths of max. 48 mm and notching widths of 6 mm or on inquiry
  • Tool holding fixture incl. nut and means of clamping
  • Toolkit with milling and drilling tools
  • VHM milling cutter for hollow steel profiles, also for reinforcement steels in PVC profiles

ROTOX CNC milling and drilling centre SFA 264 M5

Cost-efficient entry into the 3- optional 5-sides CNC processing of door and window elements.

Überlappung...

further information
Characteristic features:
  • SK30 tool holding fixture
  • 3- optional 5-sides processing of door and window profiles
  • Electronic 3-axes CNC control
  • Stored standard processings for bore, circle recess, flowdrill, thread, counter bore, slot hole, square recess, free contour
  • Visualisation of the processing geometries of all 5 programmable processing sides via PC
  • Menu directed operation
  • 5 manually movable clamping positions (standard)
Optional extras:
  • Safety fence (left, right and/or back side)
  • Connection to established process planning software systems
  • Bar-code scanner
  • Disk milling cutter holding device incl. disk milling cutter for notching depths of max. 48 mm and notching widths of 6 mm or on inquiry
  • Tool holding fixture incl. nut and means of clamping
  • Toolkit with milling and drilling tools
  • VHM milling cutter for hollow steel profiles, also for reiforcement steels in PVC profiles

ROTOX CNC milling and drilling centre SFA 256

Processing on three sides of door and window profiles.

Überlappung...

further information
Characteristic features:

  • Processing on three sides of door and window profiles
  • Electronic 3-axes CNC control
  • Visualisation of the processing contours via PC
  • Fully automatic profile processing in one clamping process
  • Milling of every desired contour:

    • profile cylinders
    • handle holes
    • letter boxes
    • ventilation slots
    • lock cases
    • etc.

Optional extras:
  • Complete protective cover for the machine
  • Automatically moveable profile clamping (not for tandem operation)
  • Bar-code scanner

ROTOX CNC-Milling and Drilling Centre SFA 255

Processing on three or five sides of door and window profiles.

Überlappung...

further information
Characteristic features:

  • SK30 tool holding fixture
  • Processing on 3 or 5 sides of door and window profiles
  • Electronic 3-axes CNC control
  • Visualisation of the machining contours via PC
  • Fully automatic profile processing in one clamping
  • End processing with saw blade
  • Milling of every desired contour:

    • profile cylinders
    • handle holes
    • holes and fixings for door plates
    • holes for striking plates
    • lock cases
    • letter boxes
    • ventilation slots
    • etc.

  • Collision avoidance system for the vices
Optional extras:
  • Tool changing facility for 6/10 tools
  • 4th axis for the continuously variable swivelling of the milling motor
  • Version with machine stand for profile bars of up to 8.000 mm length - Tandem operating
  • Manual control unit
  • Complete cover with or without sound insulation function
  • Horizontal clamping space up to 210 mm clamping distance
  • Automatic displacement of the vices (not on tandem operating)
  • Bar code scanner
  • Spray unit