Welding Machines

ROTOX Single-point welding machine SEK 501 N

Exact welding of uPVC profiles which is accurate to dimension by a machine offering easy and safe operation.

Überlappung...

further information
Characteristic features:
  • Weld bead restriction 2,0 mm
  • Welding of acute and obtuse angles from 30° to 180°
  • Two-hand safety switching
  • Turret-stop for clamping height adjustment
  • Safety switching for pressure
  • Lock in position at 90° and 180°
  • Modern PLC control
  • Parallel thrust motion at both table tops
Optional extras:
  • 1 Set profil or frame support arms
  • Weld seam restriction adjustable from 0,2 to 2 mm
  • Knife heating at the top and bottom
  • Center stop for small window elements
  • System and apparatus for double butt welding
  • Profil clamping on either the right or left

ROTOX Single-point welding machine SEK 501 S

Exact welding of uPVC profiles which is accurate to dimension for special engineering by a machine offering easy and safe operation.

Überlappung...

further information
Characteristic features:
  • Weld bead restriction adjustable 0,2 - 2,0 mm
  • Heat reflector and profile stop are switched on from below
  • Welding of external angles from 25° to 180°
  • Lock in position at 90° and 180° - Separate adjustment of set up and melting position
  • Pneumatic clamp of welding tools and angle adjusting guide rail (free of tools)
  • Two-hand safety switching with turret-stop for different profile heights
  • Modern PLC control with display terminal
  • Optional insertion process with or without profile stop
Optional extras:
  • Profile surface
  • Profile clamping and welding height 200 mm
  • Knife heating at the top and bottom
  • Digital display of the welding angle

ROTOX Two-head Welding Machine SZK 502

State of the art technology and modular design for the welding of two 90° connections in one operating cycle.

Überlappung...

further information
Characteristic features:
  • Solid machine frame with stable guidance of the moveable welding head
  • Welding heads have a robust aluminium casting construction
  • Left head fixed, optional: right head fixed
  • Automatic pressure and retraction of the units
  • Restriction knives of hardened and stainless steel
  • Turret stop for 6 different profile heights
  • Modern PLC control
  • Welding seam limitation 2,0 mm
  • Profile quick clamping device
  • Quick changing system for the welding blocks
Optional extras:
  • Welding seam limitation 0,2 mm
  • Quick changing device for teflon foil
  • Heated limitation knives
  • Profile supporting arms
  • Gasket forming units
  • Fixed head for angle weldings 30° - 180°

ROTOX Two-head Welding Machine SZK 509

The efficient way of welding elements at extreme angles from 30° to 150°, as well as round top windows for custom window applications.

Überlappung...

further information
Characteristic features:
  • Welding at both heads from 30° to 150° and at both heads in 0° position
  • No restriction in the combination possibilities of angle adjustments at the right and left head
  • Electronically adjustment of angles and support tables with 4-axes clamping units
  • Manual adjustment of the length; adjustable precisely by digital length display
  • Welding possibility with or without profile stop
  • Constant burn-off of 2,0 mm
  • Restrictor knives adjustable from 0,2 to 2,0 mm incl. heated knives for table and clamping plates
  • The fixed units is applicable as single-head welding machine

ROTOX Four-Pointer-Welder SMH 510

Accelerated Welding Features.

Überlappung...

further information
Produkt-Merkmale:
  • Dynamic servo axis control allowing true parallel welding with continuous monitoring of final weld table positions compensating for profile cut to length tolerances, dramatically decreasing welding and machine cycle times
  • On screen adjustment for weld bead limitation between 0,2 and 2,0 mm
  • CNC positioning of the machine x/y gantry via servo motors
  • PC Controls with file storage of all profile fixture offsets
  • Linear bearings and rails "T.H.K." mounted to precision ground surfaces
  • Quickchange Teflonpaper sleeves which can be changes without turning off the plate
  • Light curtain safety guarding at operator area
  • Full surround steel mesh guarding
Available optional Features:
  • Automatie profile profile unload
  • Automatieprofile unload and ejection
  • Barcode scanner and programming
  • Custom weld fixturing
  • Rotox Remote web -control

    ROTOX Multi-Head Welding Machine SMH 516

    High-performance welding machine for the simultaneous welding of four profile bars to a frame at an angle of 90° with diagonal push method with servo-drives.

    Überlappung...

    further information
    Characteristic features:
    • Welding with diagonal feed
    • Machine prepared for HTS function
    • Weld seam limitation adjustable 0.2-2 mm
    • Front profile clamping moved laterally at the corners
    • Integrated frame tool
    • On motion axes are high quality flat rails used
    • Easy and quick change of welding tools
    • Easily accessible welding mirror
    • PC control
    • Automatic frame out transport
    • Quick changing device for teflon foil
    • Control of a ROTOX-cooling station
    • With simultaneous delivery: Data transfer to ROTOX Corner Cleaning-machines with PC control
    Optional extras:
    • Heating for knives with regulation
    • Setting HTS
    • Automatic knive adjustment 2 positions just above and / or below only
    • Limitation knives for laminated profiles
    • Automatic tool carrier offset ideal for welding frame combinations
    • Equipment for the welding of U-frames
    • 2+2 welding
    • 2 piece motorized movable transom drill sets, each with one drill spindle
    • Extension for profile heights from 40 mm to 220 mm
    • Outfeed unit for double-stack welds
    • Sealing forming units
    • Bar-code scanner

    ROTOX Four Point welding machine SMK 507

    Parallel welding / Absolute sizing

    Überlappung...

    further information
    Characteristic features:
    • True "Absolute" parallel welding of all four corners via interconnection of fixture motion
    • Industrial PC allowing flash card and intranet connections including flat screen monitor
    • Fixturing configurations include:
      - Sash configurations-single/dual/triple/quad
      - Frame configurations-single/dual
    • Complete safety guarding with light curtain safety system
    • Sizing of weld to dimensions via precision gear wrack with absolute encoders
    • Movement for weld to sizing, heater plates, setting plates and fence shuttles via true T.H.K. linear rail system
    Optional extras:
    • Automatic ejection of all weld fixturing configurations
    • Notched heater & setting plates for Slope sill welding
    • Custom welding heater & setting plates allowing for multiple level welding of sash with unequal off sets
    • Bar code scanner
    • Ethernet card for network interface
    • WEB-CONTROL technical service with onside camera option

    ROTOX Four-head welding machine SVK 508 - vertical

    For welding of profiles with diagonal welding feed.

    Überlappung...

    further information
    Characteristic features:
    • Welding in diagonal feed
    • High-quality machine construction
    • Weld seam limitation 1 or 2 mm
    Optional extras:
    • PC control
    • Manual mobile (pistol) bar-code scanner
    • PC card for a network connection

    ROTOX Roller shutter guides-forming machine RFF 519

    For direct molding of the inlet funnel on roller shutter guide rails

    Überlappung...

    further information
    Characteristic features:
    • Solid and robust construction
    • Easy to operate
    • SPS control with use terminal
    • Change of operating parameter via operating terminal
    • Maintenance-free
    • Quick-change-system for moulding tools
    • Hart-coated moulding tools
    • Forming in pairs or alone
    • Mecanical support tools for difficult width of profile
    • Industrial hot air blower

    ROTOX Corner testing device EPG 3951

    For the determination of corner fracture values on welded PVC corners

    Überlappung...

    further information

    The corner testing device is one of the important quality testing devices in the window production. With the EPG 3951 you have the possibility to test the corner fracture value easy an quick according to DIN 16830-1, EN 514 and RAL -GZ 716/1.
    The EPG 3951 operates according to the GKV test and assessment prescribed test method (pressure break test).

    Characteristic features:
    • Steady housing with safety glassdoor
    • Glassdoor with safety swich
    • Motordriven stamp feed by regulated thre phase current motor
    • Permanent force insert with spindle hoist gear
    • Linear guided stamp
    • Stamp customizable to the profile contour
    • Direct force measuring with piezo force transducer
    • Digital indicator for the fracture values
    • Effective range 0 - 20000 N fracture value
    • Test of corner strength on welded profiles according RAL-GZ716/1 respectively DVS 2207 detail 25 possible
    Optional extras:
    • Stand
    • PC with monitor for indicating and analyzing the fracture value:
      - Multiple storage of profile data (database)
      - Documentation for test: machine, operator, weldingdata etc.
      - Recording of the fracture-curve and fracture-value
      - Recording in a database
      - Reading in of footage possible
      - Release of the database as exel, pdf or print possible
      - Automatic positioning of the stamp according to the needed hight
      - Manual or automatic sequence